Diesel engines are mechanical machinery typically used as mechanical engines and power generators. Diesel engines play a vital role in specific industries such as construction, mining, factories, hospitals, and marine. When these machines break, diesel mechanics are kings!
Just like most people, diesel mechanics sometimes have the ambition to climb the corporate ladder. One option to climbing the corporate ladder for diesel mechanics is to pursue the coveted GMR 2 role.
The purpose of this post is to present the specific GCC Factories requirements for diesel mechanics looking to fill the GMR 2 role. The specific GMR 2 role, in this case, is the GMR 2 role for factories where the sum of the power generated by machinery at the factory is above 3000 kW.
The requirements GCC Factories requirements for diesel mechanics are as follows:
1. You must be at least 23 years of age
Ok, this one is simple, open your Identity Document (ID). Take the difference between your year of birth & the application year. If the difference is less than 23, you do not meet this requirement and wait until you meet the minimum age requirement.
You will need to submit a certified copy of your ID or Passport to demonstrate that you meet this requirement. Make sure that the ID certification is not older than three months from submitting your application.
2. You must illustrate good conduct during your career
You need to complete the letter of sobriety and get it signed by your employer. The sobriety letter needs to be concerning your experience in factory operation and maintenance functions.
It is important to note that your diesel mechanic experience will not count when applying for the GCC Factories. It means that you must seek broader roles that cover diverse operation and maintenance functions. More on that later.
Pro-tip: Click here for a step-by-step guide on how to complete the letter of sobriety and good conduct.
3. You must be in the position of a National Technical N6 diploma in mechanical engineering (Technical College Course)
It is a requirement to have a National Technical N6 diploma in mechanical engineering. You must have scored at least 50% on all subjects. If not, you will need to redo the subjects where you scored less than 50%.
Diesel mechanics typically obtain an occupational certificate. The diesel mechanic occupational certificate issued by QCTO is NQF level 4.
Meaning, you will need to complete your N5 and N6 to make you eligible to obtain the N6 mechanical engineering technical diploma issued by the Department of Higher Education and Training.
In short, your N4 diesel mechanic occupational certificate is not enough to qualify for the GCC Factories.
4. You must have served in an apprenticeship in appropriate trade.
The diesel mechanic occupational trade is a recognised trade by the Department of Employment and Labour. Ensure you complete your trade test and obtain your official occupational trade certificate from the QCTO.
5. You must have experience in the maintenance and operation of mechanical or electrical machinery, as listed under the trade (to the satisfaction of the Commission of Examiners)
Diesel mechanics is an acceptable trade. However, you will need to have at least three (3) years of mechanical or electrical machinery maintenance and operations experience.
It is alright if the experience is only on maintenance and operation of mechanical machinery. The logical direction for diesel mechanics is to move into mechanical maintenance and operations.
Your experience as a diesel mechanic does not count but could secure a broader mechanical maintenance role.
The experience starts counting from when you obtained your occupational certificate and started working in mechanical maintenance and operations. The experience gained during training or before obtaining your trade certificate does not matter. Working as a diesel mechanic does not count unless it included other broader mechanical maintenance functions.
You need to articulate your experience in your letter of experience clearly. Make sure that you emphasize your mechanical maintenance and operation experience.
Pro-tip: Click here for a step-by-step guide on how to complete the record of qualifications and experience.
So, what type of maintenance & operation work is considered appropriate? Examples of proper maintenance & operation work include:
Planning and execution of preventative maintenance activities, e.g., vibration monitoring, oil monitoring, period plant visual inspections, ensuring machinery is operated within agreed parameters, etc.,
Ensuring and enforcing compliance to OHS Act and its regulations,
Locating sources of problems by observing mechanical devices in operation, listening for problems, and using precision measuring and testing instruments,
Planning and execution of removal of defective parts or machinery from the plant,
Carrying out quality control during the repair or manufacture of parts or machinery,
Developing parts or machinery specifications,
Ensuring compliance of part or machinery to specifications, standards, and regulations,
Control downtime by monitoring Mean Time Between Failures and taking corrective actions,
Ensure there are sufficient spares available for critical equipment.
Prepare mechanical maintenance reports,
Plan and execute plant or machinery overhauls,
Plan and execute plant capital (CAPEX) and operational (OPEX) projects, and
Operating the plant and machinery safely and ensuring good housekeeping is maintained.
The maintenance & operation work needs to be on mechanical machinery and installation, e.g., diesel generators, boilers, pressure vessels, pumps, conveyor belts, etc.
Suppose you are in doubt that your experience is appropriate. In that case, I will advise that you submit your application to the Department of Labour Commission of Examiners. This way, you will receive a comprehensive response to your eligibility. It may take anywhere between 4 to 8 weeks to get an answer from the Department of Labour.
6. You must have at least 1-year experience in a factory
This one year experience in a factory could be part of the minimum required post qualification experience. In other words, requirements stated under 5 and 6 may be concurrent.
You will indicate your experience in a factory by stating it in your letter of experience. In the letter, make sure you clearly state the type of environment you worked in, e.g., "I worked at Eskom Majuba Power Station..."
What type of working environment meets the requirements of working in a factory environment? Here are a few examples:
Working in a power station e.g. Eskom generation, Sasol boiler plant, Tongaat Boiler plant etc.,
Working in a chemical processing plant, e.g., Sasol, BASF, SAB, etc.,
Working in a fabrication plant, e.g., Arcelormittal, John Thompson Boilers, etc.,
Working in an FMCG plant, e.g., Unilever, Nestle, P&G, etc.,
This requirement's vital aspect is that the environment needs to be some production environment or boiler plant or bulk material environment. You must be responsible for ensuring that the mechanical machinery and installation are operating correctly and are maintained. The experience needs to be from a systems perspective and not just a specific machinery such as a diesel machine.
When in doubt, submit your application to the Department of Labour Commission of Examiners. This way, you will receive a comprehensive response on your eligibility. It may take anywhere between 4 to 8 weeks to get an answer from the Department of Labour.
7. You must pass all plant engineering TVET college subjects by at least 50% and passed the prescribed TVET subjects by at least 50%
The most significant confusion is the subject requirements for National Technical Diploma (N6) applicants.
The minimum subjects that GCC factories mechanical applicants with a National Technical Diploma (N6) in mechanical engineering need to have are:
N3 engineering drawing
N4 engineering science
N4 industrial electronics
N4 mathematics
N5 fluid mechanics
N5 electro-technics
N6 control systems
N6 mechanotechnics
N6 power machines
N6 strength of materials
N6 fluid mechanics
N6 supervisory management
It is essential to note the NQF level at which these subjects. For example, you could have done draughting (i.e., engineering drawing) at NQF level 5. If that is the case, you may meet the engineering drawing's subject requirement (N3, NQF level 2).
Note: The above subjects may have pre-requisite. The Department of Employment and Labour will evaluate that you have the above subjects. And the TVET college needs to ensure that you have the pre-requisite subjects to deem your qualification and the above subjects valid.
Conclusion
Diesel mechanics can qualify for the GCC Factories - provided they meet the requirements set out above.
In vital GCC Factories requirements for diesel mechanics are as follows:
Obtain your trade test
Obtain N6 qualifications
Complete minimum subjects for GCC Factories mechanical applicants
Gain mechanical operation and maintenance experience in a factory environment
Compile and submit your application with the Department of Employment and Labour
You need to formally apply with the Department of Employment and Labour to be allowed to write the Government Certificate of Competency Factories exams. Don't waste time trying to work out if you have all the subjects.
My advice is simple - When in doubt, submit your application with the Department of Employment and Labour, and you will receive a comprehensive response on your eligibility. It may take anywhere between 4 to 8 weeks for the Department of Employment and Labour to respond.
As a diesel mechanic with a National Technical Diploma (N6), you will apply for the Certificate of Competency as Mechanical Engineer (Factories) (GCC Factories in mechanical engineering).
It is essential at this point that you review:
The above will help get a better understanding of the requirements and bring you one step closer to getting your Government Certificate of Competency (GCC) factories letter of acceptance from the Department of Employment and Labour.
댓글